天津11选5走势图

山东优泉保温建材有限公司
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:
当前位置:首页 - 技术与应用-技术支持
技术与应用
对阻燃挤塑板的施工方法
作者:admin 来源:本站 发布时间:2016-01-19 17:38:41 浏览次数:431
第一,以保证挤塑板,网布规格和各项技术指标,阻燃挤塑板聚合物砂浆质量必须合格,以满足要求;然后粘贴挤塑板和墙壁必须牢固,不松动;最后聚合物砂浆与挤塑板必须粘贴紧密,不脱层,空鼓,裂缝和爆灰现象。
First, to ensure that the extruded plate, mesh specifications and various technical indicators, flame retardant plastic extruded board polymer mortar quality must be qualified, in order to meet the requirements; then paste extruded plate and the wall must be firm, not loose; finally polymer mortar and plastic extruded board must be attached tightly, no delamination, hollowing, cracks and burst the ash phenomenon.
第二,用一个干净的塑料桶混合砂浆,5:1比加水,搅拌5分钟,甚至适度的一致性可以挤出片材,保证砂浆有一定粘度。第一挤塑板和底座表面粘贴总面积30 % - 50 %,插头部分的紧固件结构的壁大于50;然后然后挤塑板的碰头缝不能末粘接剂;然后网络织物横向铺开,压结合致密,不空鼓,翘边等。
Second, with a clean plastic bucket mixed mortar, 5:1 ratio of water, stirring for 5 minutes, and even moderate consistency can be extruded sheet, to ensure that the mortar has a certain viscosity. First plastic extruded board and the base is stuck to the surface of a total area of 30% - 50%, the wall of the plug portion of the fastener structure more than 50, then plastic extruded board meet seam not at the end of the adhesive; then network fabric of the horizontal spread, pressure combined with a dense, no hollowing, become warped edge.
友情链接:传奇彩票官网  博九官网  大无限彩票  幸运彩票  博九官网  博九娱乐网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!