天津11选5走势图

山东优泉保温建材有限公司
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:
当前位置:首页 - 新闻动态
新闻动态
挤塑板的抹面工序的工艺流程
作者:admin 来源:本站 发布时间:2017-01-03 17:29:38 浏览次数:320

在挤塑板的施工过程中,抹面是非常重要的步骤,经常需要进行挤塑板底面的抹灰和面层的抹灰。
In the construction process of plastic extruded board, plaster is a very important step, we often need plastering plastering and the bottom surface of the extruded plate surface layer.
在挤塑板底层抹聚合物砂浆之前,要先清理挤塑板的底面,在表面涂抹上界面剂,等待晾干至不粘手时,再把聚合物砂浆均匀地涂抹在挤塑板底面上,尽量控制厚度在2mm左右。而在面层抹聚合物砂浆前,要先在网格布表面抹上适量的粘结剂来粘接固定网格布,等粘结剂干燥后,再在面层上抹聚合物砂浆,注意要控制好厚度,如果抹灰层能够正好盖住网格布,则说明厚度是适宜的,一般在1mm左右。

济南挤塑板厂家
Before the cast polymer mortar in the bottom surface of the bottom board, we should first clean up plastic extruded board, coated on the surface of the interface agent, waiting to dry is not sticky, then the polymer mortar evenly on the extruded board on the bottom surface, try to control the thickness is about 2mm. And with polymer mortar in the surface layer, to binder first in the mesh surface to cast the right amount of fixed mesh, such as binder after drying, and then wipe the polymer mortar in the surface layer, pay attention to control the thickness, if the plaster layer can just cover mesh, the thickness is generally suitable. At about 1mm.
如果灰层太厚的话,就容易导致板材铺设固定完后与墙面之间存在较大的空隙,影响后期的使用,需要多加注意。
If the ash layer is too thick, it is easy to lead to the existence of a large gap between the plate after the completion of the laying of the wall, the impact of the use of the latter, the need to pay more attention to.
本文由济南挤塑板厂家为您提供,我们的网站是: 我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!
This paper by Ji'nan manufacturers to provide you with the extruded board, our website is: we will provide higher quality service to serve the enthusiasm for you, welcome your visit!

友情链接:博九彩票  博九  传奇彩票  博九_博九官网  博九彩票  博九彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!