天津11选5走势图

山东优泉保温建材有限公司
地址:齐河县焦庙镇小李村西邻
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:
当前位置:首页 - 新闻动态
新闻动态
挤塑板外墙保温施工配制砂浆的流程
作者:admin 来源:本站 发布时间:2016-03-30 11:00:54 浏览次数:259
1)施工使用的砂浆分为专用粘结砂浆及面层聚合物抗裂砂浆。山东挤塑板
1) the construction of the use of mortar is divided into special adhesive mortar and the surface layer of polymer anti crack mortar.
2)施工时用手持式电动搅拌机搅拌,拌制的粘结砂浆重量比为水:砂浆=1:5,边加水边搅拌;搅拌时间不少于5min,搅拌必须充分、均匀,稠度适中,并有一定黏度。

2) construction with a hand-held electric mixer, mixing of the bonding mortar weight ratio of water: mortar was 1:5, adding water while stirring; mixing time of not less than 5min, mixing must fully and evenly, moderate density and viscosity.

山东挤塑板

3)砂浆调制完毕后,须静置5min,使用前再次进行搅拌,拌制好的砂浆应在1h 内用完。
3) after the mortar is finished, it is required to set up 5min, before using it again to stir, mix the mortar should be used in the 1h.
4)刷专用界面剂一道为增强挤塑板与粘结砂浆的结合力,在粘贴挤塑板前,在挤塑板粘贴面薄薄涂刷一道专用界面剂;待界面剂晾干后方可涂抹聚合物粘结砂浆进行墙面粘贴施工。
4) brush dedicated interface agent together to enhance the binding force of extruded polystyrene board and bonding mortar, in front of the paste extrusion board, in paste extrusion plate surface thin brushing a special interface agent; until the interface agent to dry before can be coated polymer bonding mortar construction of the wall paste.
5)预粘板端翻包网格布在飘窗板、挑檐、阳台、伸缩缝等位置预先粘贴板边翻包网格布,将不小于300mm宽的网格布中的120mm宽用专用粘结砂浆牢固粘贴在基面上(粘结砂浆厚度不得超过2mm),后期粘贴挤塑板时再将剩余网格布翻包过来。
5) pre glued board end turn in the position of the window plate, cornice, balcony, and other joints pre pasted plate edge over grid bag cloth mesh cloth pack, will be not less than 300mm wide mesh 120mm wide special bonding mortar firmly pasted on the surface (the thickness of mortar shall not exceed 2mm), after paste extruded board then remaining grid cloth package turning over.
友情链接:传奇彩票  博九  博九彩票网  博九彩票  博九彩票官网  博九彩票注册  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!